Fellow Ode Gen 2 Review (2026): Flat-Burr Filter Grinder

The Fellow Ode Brew Grinder Gen 2 is a single-dose electric grinder built for one job and built to do it beautifully: filter coffee. It runs 64mm stainless-steel flat burrs— a bigger, flatter cutting geometry than the conical burrs in most home grinders — and it is aimed squarely at drip, pour-over, AeroPress, French press and cold brew. If you brew any of those and you have wanted a proper flat-burr grind without stepping up to commercial-sized money, the Ode Gen 2 is one of the most appealing options on the counter. See where it lands among the alternatives in our best grinders for drip and pour over.

Two things make it a joy to live with. It is genuinely quiet — Fellow engineered the motor and housing to keep the grind noise down, and next to a typical whirring electric it is noticeably calmer. And it is clean: a single-dose design with a 100g capacity, an anti-static system, and a built-in knocker that dislodges grounds so retention stays low means you weigh a dose in, grind it, and get almost all of it back with very little mess or static cling at the chute. Add a compact aluminium body that looks like a design object rather than an appliance and you have a grinder people are happy to leave out on display. It is, unsurprisingly, a favourite in our best single-dose grinders for exactly these reasons.

Now the honest, load-bearing caveat, and it is the whole reason to read a review before buying: the Ode Gen 2 is not for espresso. This is not our opinion imposed on the machine — Fellow state plainly that the Ode is not intended for espresso, because the burrs and motor are tuned for the medium-to-coarse range that immersion and drip brewing want, and it simply does not grind fine enough to build espresso pressure. Do not buy it hoping to also pull shots; you will be disappointed, and it is the wrong tool for the job. If espresso is anywhere in your plans, stop here and read our best grinders for espresso instead. If you are choosing between the Ode and a versatile stepped electric, our Baratza Encore vs Fellow Ode comparison is the one to read.

Best flat-burr grinder for filter coffee

Fellow Ode Brew Grinder Gen 2

64mm stainless-steel flat burrs11 grind settings, 31 total steps100g single-dose, anti-static, built-in knockerBuilt for filter — not espresso (per Fellow)

7.7/10

An excellent, beautiful, near-silent flat-burr grinder for filter coffee — and explicitly the wrong tool for espresso. The 64mm stainless flat burrs give drip, pour-over, AeroPress and French press a clean, even grind that punches above a conical grinder of similar size, and the single-dose design with anti-static and a built-in knocker keeps retention low and the counter tidy. It is quiet, compact and genuinely lovely to use. But Fellow are explicit that the Ode is not intended for espresso: it does not grind fine enough to build shot pressure, and no amount of dialling changes that. Buy it if filter coffee is your world and you want a flat-burr grind in a grinder you are happy to leave on display. Do not buy it if espresso is anywhere in your plans, and think twice if you want one grinder that does both — because this one does not.

Filter & pour-over grind: 9
Grind consistency: 9
Build & design: 9
Quietness: 8
Single-dose workflow: 9
Espresso capability: 2

Pros

64mm flat burrs deliver a clean, even filter grind that outclasses a similarly sized conical grinder for drip and pour-over
Genuinely quiet — the motor and housing are engineered to keep grind noise low, noticeably calmer than a typical electric
Single-dose design with anti-static and a built-in knocker keeps retention low and the counter tidy — weigh in, grind, get almost all of it back
11 settings and 31 total steps give ample, repeatable control across the filter range
Compact aluminium body that looks like a design object, not an appliance — happy to live on display
Automatic stop and a simple, single-purpose interface make it effortless to use

Cons

Does not grind fine enough for espresso — Fellow state the Ode is not intended for it, and no dialling changes that
Single-purpose by design: if you want one grinder for both filter and espresso, this is not it
Premium price for a filter-only grinder — a versatile stepped electric costs less and also does espresso
31 total steps are plenty for filter but fewer than a stepless dial if you like micro-adjusting
100g single-dose capacity means batch-grinding for a crowd is a repeated weigh-and-grind exercise

Don't buy this if…

…espresso is anywhere in your plans, or you want a single grinder that covers both filter and espresso — the Ode Gen 2 is a filter-only tool by design and will not grind fine enough for shots. A versatile stepped electric or a dedicated espresso grinder is the honest choice there.

For filter coffee the Ode Gen 2 does exactly what a good flat-burr grinder is supposed to do: it produces a tight, even particle distribution that makes brewed coffee taste cleaner and more defined. Flat burrs like these tend to grind more uniformly than the conical burrs found in most home electrics, and on a pour-over or a batch drip that uniformity is what you taste as clarity and even extraction. Across the 11 settings and 31 total steps you have ample, repeatable room to move from a fine drip grind out to a coarse French press, and once you find a setting it stays put.

The single-dose workflow is the other half of the appeal. You weigh a dose — the hopper takes up to 100g — drop it in, grind, and the anti-static system plus a built-in knocker means almost all of it comes back out with very little clinging inside or scattering across the counter. That is the whole promise of single-dosing: fresh beans every time, no stale hopper, low retention, and a tidy bench. Combined with how quiet the Ode runs, it is one of the more pleasant grinders to actually use each morning. Just keep the frame of reference fixed on filter: this experience is built for brewed coffee, and it is genuinely excellent there.

$399.95View on Amazon

Price as of Jul 30, 2026. Prices change — Amazon's at checkout is the one that counts.

#ad · we may earn a commission from this link to Fellow Ode Brew Grinder Gen 2

Why 64mm flat burrs matter for filter coffee

The headline hardware is the 64mm stainless-steel flat burr set. Flat burrs grind by pulling beans between two parallel rings, and at this diameter they tend to produce a more uniform particle distribution than the conical burrs in most home grinders — fewer boulders, fewer fines, more grounds sitting in the range you actually want. For filter methods, where the water contacts the grounds relatively gently, that uniformity translates directly into a cleaner, more even extraction and a more articulate cup. It is the same reason flat-burr grinders are prized in cafes for brewed coffee, brought down to a single-dose home format. If you want to see how the Ode stacks up against other flat-burr options, that is exactly the field we cover in our best flat-burr grinders roundup.

Single-dose, anti-static and quiet: the daily-use case

A lot of what makes the Ode Gen 2 lovely is not the grind, it is the living-with-it. Single-dosing means you grind only what you brew, so the beans in the box stay sealed and fresh and there is no stale hopper sitting in the light. The 100g capacity is ample for a single-dose workflow, and the anti-static system with the built-in knocker keeps retention low and the mess down — two of the most common frustrations with home grinders, largely designed out. And it is quiet: Fellow put real work into muffling the motor and housing, so it is noticeably calmer than a typical electric, which matters if you grind early in a shared home. All of that is why it is a mainstay of our best single-dose grinders.

Not for espresso — and that is by design

This is the single most important thing to understand before you buy, so we will be blunt: the Ode Gen 2 is not an espresso grinder. Fellow themselves state the Ode is not intended for espresso. The burrs and motor are tuned for the medium-to-coarse range that drip, pour-over and immersion brewing want, and it does not grind fine enough, or with the fine-end adjustment resolution, to build the pressure espresso needs. This is not a flaw to be dialled around; it is a deliberate design choice for a filter grinder. Plenty of buyers get burned by assuming a good grinder must do everything — it does not, and the Ode is proof that a tool built for one job can be better at that job precisely because it is not compromised for another. If espresso is anywhere in your plans, buy the right category from our best grinders for espresso instead, and if you want one grinder to cover both worlds, understand that the Ode is not that grinder.

Ode Gen 2 vs a versatile stepped electric

If your real question is "should I buy the Ode or a do-everything electric," the answer comes down to whether you brew espresso. A versatile stepped grinder like a Baratza Encore ESP costs less and can grind for both filter and espresso, but it is a conical grinder that will not match the Ode's filter clarity or its quiet, single-dose polish. The Ode is the better filter grinder and the nicer object; the versatile electric is the better all-rounder and the better value if espresso is on the table. We put that decision side by side in our Baratza Encore vs Fellow Ode comparison, which is the piece to read if you are torn between the two philosophies. For the broader brewed-coffee field, our best grinders for drip and pour over ranks the Ode against everything else aimed at filter.

Who should buy it

Buy the Ode Gen 2 iffilter coffee — drip, pour-over, AeroPress, French press, cold brew — is your world, and you want a genuine flat-burr grind in a quiet, single-dose grinder you are happy to leave on display. This is precisely what it is for.
Buy it especially iflow retention, a tidy counter and quiet operation matter to you — the single-dose, anti-static, knocker-equipped design nails all three.
Buy a versatile electric instead ifyou want one grinder for both filter and espresso, or you want to spend less — a stepped conical grinder is the more flexible, better-value all-rounder.
Do not buy the Ode ifespresso is anywhere in your plans — it does not grind fine enough for shots, and Fellow say so themselves. Buy a dedicated espresso grinder.

What we did not test

We have not run this grinder for months on a bench, and we will not pretend we have. This review compiles Fellow's published specifications for the Ode Brew Grinder Gen 2 — the 64mm stainless flat burrs, the 11 settings and 31 total steps, the 100g single-dose capacity, the anti-static system and built-in knocker, the roughly 140W motor and the "not intended for espresso" guidance — and weighs aggregated owner reports against our scoring rubric. Where hands-on time would tell you more than a spec sheet — exactly how few grams the burr chamber retains in daily use, how the settings feel across a range of beans, how the finish and motor hold up over years — we say so plainly rather than invent a number. Our scores are judgments from documented research, not lab measurements; we do not have a lab.

How we picked

We did not lab-test this gear

Everyone in this category says they tested twenty machines. We have not pulled shots on every product here, and we say so. What we did instead: compiled the published specifications, cross-checked the manufacturer manuals, computed the running cost (wattage to energy, grams-per-shot to cost-per-cup), weighed aggregated owner reports, and scored each product against a published rubric. The scores are judgments from documented research — not measurements we took, because we do not have a test lab and we will not pretend we do. Where hands-on time would tell you more than a spec sheet, we flag it. Where a number came from someone else's work, we name them in Sources.

Questions

Frequently asked

Can the Fellow Ode Gen 2 grind for espresso?

No. Fellow state the Ode is not intended for espresso, and it does not grind fine enough to build shot pressure. The burrs and motor are tuned for the medium-to-coarse range that drip, pour-over and immersion brewing want. This is a deliberate design choice, not a flaw to dial around — if espresso is in your plans, buy from our best grinders for espresso instead.

What is the Fellow Ode Gen 2 best for?

Filter coffee. It is built for drip, pour-over, AeroPress, French press and cold brew, and its 64mm flat burrs give those methods a clean, even grind that outclasses a similarly sized conical grinder. It is a mainstay of our best grinders for drip and pour over and pairs naturally with the brewers in our best pour-over makers.

Is the Fellow Ode Gen 2 single dose?

Yes. It is a single-dose grinder with a 100g capacity — you weigh in only what you plan to brew, grind it, and an anti-static system plus a built-in knocker return almost all of it with low retention and little mess. That means fresh beans every time and no stale hopper sitting in the light, which is a big part of the Ode's appeal.

Is the Fellow Ode Gen 2 quiet?

Relatively, yes. Fellow engineered the motor and housing to keep grind noise down, and it is noticeably calmer than a typical whirring electric. It is not silent — it is still a burr grinder — but the difference is real and matters if you grind early in a shared home.

Fellow Ode Gen 2 or a Baratza Encore — which should I buy?

It depends on whether you brew espresso. The Ode is the better filter grinder and the nicer, quieter, single-dose object, but it is filter-only. A Baratza Encore ESP costs less and grinds for both filter and espresso, though it will not match the Ode's filter clarity. We lay the decision out in our Baratza Encore vs Fellow Ode comparison.

Keep reading

Receipts

Sources

We do not run a testing lab, and we do not pretend to. Where a measured number came from someone else's work, we name them and link them. Where we could not verify something, we say so on the page rather than quietly leaving it out. Read our full method.